Üdvözöljük itt: Pirometer.hu! - Hívjon +36 1 4057771

Automatikus égővezérlő egységek BCU 400

Automatikus égővezérlők beépített gyújtó transzformátorral, fém házban gázégők felügyeletére és vezérlésére, folyamatos üzemre, ionizációs vagy UV lángőrzésre. Üzemállapot, paraméterek és lángjel megjelenítése. Diagnosztika és paraméter állítás optikai csatlakozóval. Kézi üzemeltetés égőbeállításhoz. Tanusítással SIL 3 és PL e rendszerekhez.
BCU 440: közvetlen gyújtású, ionizációs lángőrzésű égőkhöz max. 350 kW -ig
BCU 460: közvetlen gyújtású égőkhöz, opcionális levegő szelep vezérléssel
BCU 465: további levegő szelep vezérlési lehetőségekkel, elsősorban sugárzócsöves égőkhöz
BCU 480: gyújtóégővel gyújtott égőkhöz
BCU 4...B1: Profibus DP kapcsolattal

Biztonsági idő gyújtáskor: 3 s, 5 s vagy 10 s
Biztonsági idő üzem közben: 1 s vagy 2 s
Működtető feszültség: 115 V AC vagy 230 V AC

Látható: 61-120 / 1509 összesen
Mutat oldalanként
Rendezés:
  • 88611005

    BCU 480-5/3/1LW3GBD2S3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 7 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 3 s
    • 25 Main burner flame proving period tFS2: 3 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88611358

    BCU 480-5/3/1LW3GBD2S3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 5 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610261

    BCU 480-5/3/1LW3GBD2S3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610405

    BCU 480-5/3/1LW3GBD2S3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610733

    BCU 480-5/3/1LW3GBD2S3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 05 Main burner switch-off threshold: 4 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 5 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610734

    BCU 480-5/3/1LW3GBD2S3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 05 Main burner switch-off threshold: 4 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 5 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611429

    BCU 480-5/3/1LW3GBD2S3/2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 3 start-up attempts, pilot burner
    • 2 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88611341

    BCU 480-5/3/1LW3GBD2S4/4B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 4 start-up attempts, pilot burner
    • 4 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610834

    BCU 480-5/3/1LW3GBD3S2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610983

    BCU 480-5/3/1LW3GBD3S2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610067

    BCU 480-5/3/1LW3GBD3S2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610403

    BCU 480-5/3/1LW3GBD3S2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610429

    BCU 480-5/3/1LW3GBD3S2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610835

    BCU 480-5/3/1LW3GBD3S2/2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts, pilot burner
    • 2 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610474

    BCU 480-5/3/1LW3GBD3S2/2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts, pilot burner
    • 2 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610764

    BCU 480-5/3/1LW3GBD3S3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610731

    BCU 480-5/3/1LW3GBD3S3/3B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 3 start-up attempts, pilot burner
    • 3 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Pilot burner is switched off
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611263

    BCU 480-5/3/2L5W3GBD2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Low fire delay time: 5 s
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610797

    BCU 480-5/3/2LW3GBD2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610798

    BCU 480-5/3/2LW3GBD2S2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88611421

    BCU 480-5/3/2LW3GBD3S2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610656

    BCU 480-5/5/1LW3GBD2S2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610848

    BCU 480T-10/10/2LR8-D3B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • High temperature operation: with continuous operation with ionisation/UVD
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88611246

    BCU 480T-5/5/2LR3-D2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • High temperature operation: with intermittent operation with UVS
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610097

    BCU 480T-10/10/1LR3-D2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 10 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • High temperature operation: with intermittent operation with UVS
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 30 s
  • 88610446

    BCU 480T-10/10/2LR3-D2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • High temperature operation: with intermittent operation with UVS
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 1 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610465

    BCU 480T-10/10/2LR3-D3B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • High temperature operation: with continuous operation with ionisation/UVD
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610127

    BCU 480T-10/10/2LR8-D2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • High temperature operation: with intermittent operation with UVS
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 10 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610675

    BCU 480T-10/10/2LR8-D3B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • High temperature operation: with continuous operation with ionisation/UVD
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 30 s
  • 88610682

    BCU 480T-10/10/2LR8-D3B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • High temperature operation: with continuous operation with ionisation/UVD
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 30 s
  • 88610892

    BCU 480T-10/10/2LW8-D2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • High temperature operation: with intermittent operation with UVS
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610635

    BCU 480T-5/3/2LR3-D2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • High temperature operation: with intermittent operation with UVS
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610876

    BCU 465-5/1LW3GBD2ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 8 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 60 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611480

    BCU 465T-5/2LR8-D3OCB1/1

    Burner control unit, series 400
    • Version for extended air control
    • T-product, FM and CSA approved
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • High temperature operation: with continuous operation with ionisation/UVD
    • With POC control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 09 Position indicator feedback
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88610592

    BCU 480-10/3/1LW1GBD2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88611274

    BCU 480-3/5/1LW1GBD3B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610644

    BCU 480-5/3/1LR1GBD2S4/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 4 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610631

    BCU 480-5/3/1LW1GBD3B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610953

    BCU 480-5/3/1LW1GBD3S2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611444

    BCU 480-10/3/1LW3GBS2/1CB1/2

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88611574

    BCU 465-3/1LR8GBD3S2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 7 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610327

    BCU 465-3/1LW8GBD2S2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 4 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 2 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610540

    BCU 465-3/1LW8GBD2S2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 7 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610543

    BCU 465-3/1LW8GBD2S2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 7 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610927

    BCU 465-3/1LW8GBD3S2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 0 s
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610539

    BCU 465-3/1LW8GBD3S2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 7 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610544

    BCU 465-3/1LW8GBD3S2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 7 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610724

    BCU 465-3/1LW8GBD3S2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 7 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 1 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610725

    BCU 465-3/1LW8GBD3S2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 7 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 7 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610726

    BCU 465-3/1LW8GBD3S2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 7 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88611021

    BCU 480-10/10/1LWGBD2CB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 10 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 9 s
  • 88610027

    BCU 480-10/5/1LW3GBCB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 10 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610998

    BCU 480-3/3/1LW3GBCB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610275

    BCU 480-3/3/1LWGBD3CB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 9 s
  • 88610222

    BCU 480-3/5/1LW3GBCB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 10 s
    • 21 Minimum burner pause time tBP: 10 s
    • 23 Burener/pilot burner flame proving period tFS1: 3 s
    • 25 Main burner flame proving period tFS2: 5 s
    • 30 Air valve opens with V2
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611023

    BCU 480-5/3/1LW3GBCB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610279

    BCU 480-5/3/1LW3GBCB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610361

    BCU 480-5/3/1LWGBD3S3/1CB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 9 s
  • 88611233

    BCU 480-5/3/1LWGBD3S4/1CB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 4 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 2 mikro A
    • 05 Main burner switch-off threshold: 2 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 1 s
    • 21 Minimum burner pause time tBP: 10 s
    • 23 Burener/pilot burner flame proving period tFS1: 2 s
    • 25 Main burner flame proving period tFS2: 2 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 9 s
  • 88611287

    BCU 480-5/5/1LW3GBS3/3CB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 3 start-up attempts, main burner
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • Látható: 61-120 / 1509 összesen
    Mutat oldalanként
    Rendezés:
    Top