Üdvözöljük itt: Pirometer.hu! - Hívjon +36 1 4057771

Automatikus égővezérlő egységek BCU 400

Automatikus égővezérlők beépített gyújtó transzformátorral, fém házban gázégők felügyeletére és vezérlésére, folyamatos üzemre, ionizációs vagy UV lángőrzésre. Üzemállapot, paraméterek és lángjel megjelenítése. Diagnosztika és paraméter állítás optikai csatlakozóval. Kézi üzemeltetés égőbeállításhoz. Tanusítással SIL 3 és PL e rendszerekhez.
BCU 440: közvetlen gyújtású, ionizációs lángőrzésű égőkhöz max. 350 kW -ig
BCU 460: közvetlen gyújtású égőkhöz, opcionális levegő szelep vezérléssel
BCU 465: további levegő szelep vezérlési lehetőségekkel, elsősorban sugárzócsöves égőkhöz
BCU 480: gyújtóégővel gyújtott égőkhöz
BCU 4...B1: Profibus DP kapcsolattal

Biztonsági idő gyújtáskor: 3 s, 5 s vagy 10 s
Biztonsági idő üzem közben: 1 s vagy 2 s
Működtető feszültség: 115 V AC vagy 230 V AC

Látható: 121-180 / 1509 összesen
Mutat oldalanként
Rendezés:
  • 88611022

    BCU 480T-10/10/1LW-D2CB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 10 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • High temperature operation: with intermittent operation with UVS
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 9 s
  • 88610269

    BCU 480-5/3/1LW2GBCB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7-25/20
    • Front film in English with additional stickers in D, F, I, NL, E
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610836

    BCU 465-3/1LW3GBD2AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610696

    BCU 465-3/1LW3GBD3AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610699

    BCU 465-3/1LW3GBD3AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 5 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611309

    BCU 465-3/1LW3GBD3S2AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 2 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 3 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 10 s
    • 21 Minimum burner pause time tBP: 2 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 5 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88611310

    BCU 465-3/1LW3GBD3S2AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 2 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 2 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 3 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 5 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610509

    BCU 465-3/1LW8GBD2AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 4 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88611501

    BCU 465-3/1LW8GBD3S2AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 7 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610653

    BCU 465-3/1LW8GBD3S2AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 3 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 10 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 1 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610179

    BCU 465-3/1LW8GBD3S3AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 3 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 0 s
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 5 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610875

    BCU 465-5/1LW3GBD2AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 8 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 60 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610566

    BCU 465-5/1LW3GBD3AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610392

    BCU 465-5/1LW8GBD3AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88610992

    BCU 465T-10/2LR8-D2OB1/1

    Burner control unit, series 400
    • Version for extended air control
    • T-product, FM and CSA approved
    • Safety time on start-up tSA: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • High temperature operation: with intermittent operation with UVS
    • With POC control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 09 Position indicator feedback
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 5 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88611550

    BCU 465T-5/2LR8-D3OB1/1

    Burner control unit, series 400
    • Version for extended air control
    • T-product, FM and CSA approved
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • High temperature operation: with continuous operation with ionisation/UVD
    • With POC control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 09 Position indicator feedback
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88610395

    BCU 465T-10/2LR8-D2OB1/1

    Burner control unit, series 400
    • Version for extended air control
    • T-product, FM and CSA approved
    • Safety time on start-up tSA: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • High temperature operation: with intermittent operation with UVS
    • With POC control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 09 Position indicator feedback
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 5 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610625

    BCU 465T-10/2LR8-D2OB1/1

    Burner control unit, series 400
    • Version for extended air control
    • T-product, FM and CSA approved
    • Safety time on start-up tSA: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • High temperature operation: with intermittent operation with UVS
    • With POC control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 09 Position indicator feedback
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 5 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610095

    BCU 465T-3/1LR8-D3OB1/1

    Burner control unit, series 400
    • Version for extended air control
    • T-product, FM and CSA approved
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • High temperature operation: with continuous operation with ionisation/UVD
    • With POC control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 09 Position indicator feedback
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610268

    BCU 480-3/3/1LW1GBCB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611278

    BCU 480-5/3/2LW1GBS2/1CB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Pilot burner is switched off
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611556

    BCU 480-3/3/1LW3GBB1/2

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610577

    BCU 480-5/3/1LW3GBS2/1B1/2

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611337

    BCU 480-3/3/1LW1GBB1/2

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611000

    BCU 480-5/5/1LW3GBPD3S4/4U

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Integrated industrial chassis plug, 16-pin
    • High temperature operation: with continuous operation with ionisation/UVD
    • 4 start-up attempts, pilot burner
    • 4 start-up attempts, main burner
    • Configured and prepared for UVD 1
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610750

    BCU 480-5/10/1LW2GBPD3S4/2U

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 10 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7-25/20
    • Front film in English with additional stickers in D, F, I, NL, E
    • Integrated industrial chassis plug, 16-pin
    • High temperature operation: with continuous operation with ionisation/UVD
    • 4 start-up attempts, pilot burner
    • 2 start-up attempts, main burner
    • Configured and prepared for UVD 1
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 30 s
  • 88611326

    BCU 480-10/3/1LR3GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 3 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88611327

    BCU 480-10/3/1LR3GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 3 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 30 s
  • 88610531

    BCU 480-10/3/1LR3GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88611027

    BCU 480-10/3/1LW3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88611063

    BCU 480-10/3/1LW3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88611100

    BCU 480-10/3/1LW3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 10 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88611099

    BCU 480-10/3/1LW3GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 10 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610122

    BCU 480-10/3/1LW3GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 30 s
  • 88610205

    BCU 480-10/3/1LW3GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 10 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 30 s
  • 88610388

    BCU 480-10/5/1LW3GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 10 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610145

    BCU 480-10/5/2LW3GBS4/4B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts, pilot burner
    • 4 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 10 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610312

    BCU 480-3/3/1LR3GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610273

    BCU 480-3/3/1LW3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611144

    BCU 480-3/3/1LW3GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Pilot burner is switched off
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 10 s
    • 25 Main burner flame proving period tFS2: 10 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611146

    BCU 480-3/3/2LR3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611521

    BCU 480-5/3/1L5W3GBS2/2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Low fire delay time: 5 s
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 2 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 3 mikro A
    • 05 Main burner switch-off threshold: 3 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 8 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610997

    BCU 480-5/3/1LR3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610335

    BCU 480-5/3/1LR3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610856

    BCU 480-5/3/1LR3GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610355

    BCU 480-5/3/1LR3GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610407

    BCU 480-5/3/1LR3GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610588

    BCU 480-5/3/1LR3GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611375

    BCU 480-5/3/1LR3GBS3/2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 2 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610862

    BCU 480-5/3/1LW3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Pilot burner is switched off
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 60 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode not limited
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611389

    BCU 480-5/3/1LW3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610021

    BCU 480-5/3/1LW3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610168

    BCU 480-5/3/1LW3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 9 s
    • 21 Minimum burner pause time tBP: 3 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610332

    BCU 480-5/3/1LW3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610365

    BCU 480-5/3/1LW3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610501

    BCU 480-5/3/1LW3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Pilot burner is switched off
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610514

    BCU 480-5/3/1LW3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Pilot burner is switched off
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611053

    BCU 480-5/3/1LW3GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 16 Pilot burner is switched off
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611373

    BCU 480-5/3/1LW3GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611394

    BCU 480-5/3/1LW3GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • Látható: 121-180 / 1509 összesen
    Mutat oldalanként
    Rendezés:
    Top