Üdvözöljük itt: Pirometer.hu! - Hívjon +36 1 4057771

Automatikus égővezérlő egységek BCU 400

Automatikus égővezérlők beépített gyújtó transzformátorral, fém házban gázégők felügyeletére és vezérlésére, folyamatos üzemre, ionizációs vagy UV lángőrzésre. Üzemállapot, paraméterek és lángjel megjelenítése. Diagnosztika és paraméter állítás optikai csatlakozóval. Kézi üzemeltetés égőbeállításhoz. Tanusítással SIL 3 és PL e rendszerekhez.
BCU 440: közvetlen gyújtású, ionizációs lángőrzésű égőkhöz max. 350 kW -ig
BCU 460: közvetlen gyújtású égőkhöz, opcionális levegő szelep vezérléssel
BCU 465: további levegő szelep vezérlési lehetőségekkel, elsősorban sugárzócsöves égőkhöz
BCU 480: gyújtóégővel gyújtott égőkhöz
BCU 4...B1: Profibus DP kapcsolattal

Biztonsági idő gyújtáskor: 3 s, 5 s vagy 10 s
Biztonsági idő üzem közben: 1 s vagy 2 s
Működtető feszültség: 115 V AC vagy 230 V AC

Látható: 181-240 / 1509 összesen
Mutat oldalanként
Rendezés:
  • 88610030

    BCU 480-5/3/1LW3GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610490

    BCU 480-5/3/1LW3GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611315

    BCU 480-5/3/1LW3GBS2/2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 2 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610100

    BCU 480-5/3/1LW3GBS2/2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 2 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610101

    BCU 480-5/3/1LW3GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 05 Main burner switch-off threshold: 4 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 5 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610406

    BCU 480-5/3/1LW3GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610154

    BCU 480-5/3/1LW3GBS3/3B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 3 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610233

    BCU 480-5/3/1LW3GBS4/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610248

    BCU 480-5/3/1LW3GBS4/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610311

    BCU 480-5/3/1LW3GBS4/2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts, pilot burner
    • 2 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88611558

    BCU 480-5/3/1LW8GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88611368

    BCU 480-5/3/1LWGBD3B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 9 s
  • 88610352

    BCU 480-5/3/1LWGBD3S3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 9 s
  • 88610466

    BCU 480-5/3/2LR3-B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88611114

    BCU 480-5/3/2LW3GBS4/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610833

    BCU 480-5/5/1LR3GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611355

    BCU 480-5/5/1LR3GBS2/2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 2 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Pilot burner is switched off
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 3 s
    • 25 Main burner flame proving period tFS2: 5 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610769

    BCU 480-5/5/1LR3GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610314

    BCU 480-5/5/1LR8GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88610507

    BCU 480-5/5/1LW3GBS2/2B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 2 start-up attempts, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610830

    BCU 480-5/5/1LW8GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88610318

    BCU 480-5/5/1LW8GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88610400

    BCU 480-5/5/2LR8GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 2 mikro A
    • 05 Main burner switch-off threshold: 2 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 10 s
    • 21 Minimum burner pause time tBP: 10 s
    • 23 Burener/pilot burner flame proving period tFS1: 1 s
    • 25 Main burner flame proving period tFS2: 1 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88611347

    BCU 480-5/5/2LW8GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88611128

    BCU 480T-10/10/2LR8-B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Pilot burner is switched off
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610995

    BCU 480T-10/5/2LR3-B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 1 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610506

    BCU 480T-3/3/1LR3-B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Restart after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610394

    BCU 480T-5/3/2LR3-B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • T-product, FM and CSA approved
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610847

    BCU 480-5/3/1LW2GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7-25/20
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 05 Main burner switch-off threshold: 4 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 2 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88611300

    BCU 465-3/1LR3GBS4ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611331

    BCU 465-3/1LW3GBACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611540

    BCU 465-3/1LW3GBS4ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 3 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611047

    BCU 465-3/1LW8GBACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611234

    BCU 465-5/1LR3GBACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611235

    BCU 465-5/1LR3GBACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 2 s
    • 40 Air supply for restart/start-up attempts
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 20 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610252

    BCU 465-5/1LR3GBACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 15 s
    • 21 Minimum burner pause time tBP: 5 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610057

    BCU 465-5/1LR3GBS3ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 30 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 5 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 30 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88611245

    BCU 465-5/1LR3GBS4ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 2 s
    • 40 Air supply for restart/start-up attempts
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 20 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611301

    BCU 465-5/1LR3GBS4ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88611001

    BCU 465-5/1LW3GBACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610877

    BCU 465-5/1LW3GBS3ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 0 s
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 2 s
    • 38 Air post ventilation time: 2 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610032

    BCU 465-5/1LW3GBS3ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 0 s
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 2 s
    • 38 Air post ventilation time: 2 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610012

    BCU 465-5/1LW3GBS4ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 1 s
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 1 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610014

    BCU 465-5/1LW3GBS4ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 0 s
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 2 s
    • 38 Air post ventilation time: 2 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610060

    BCU 465-5/1LW3GBS4ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 1 s
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 1 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610080

    BCU 465-5/1LW3GBS4ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 3 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610091

    BCU 465-5/1LW3GBS4ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 1 s
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 1 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610107

    BCU 465-5/1LW3GBS4ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610460

    BCU 465-5/1LW3GBS4ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610586

    BCU 465-5/1LW3GBS4ACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 5 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610520

    BCU 465T-10/2LR8-OCB1/1

    Burner control unit, series 400
    • Version for extended air control
    • T-product, FM and CSA approved
    • Safety time on start-up tSA: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • With POC control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 09 Position indicator feedback
    • 39 Air supply time after safety shut-down: 0 s
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610715

    BCU 465T-10/2LR8-OCB1/1

    Burner control unit, series 400
    • Version for extended air control
    • T-product, FM and CSA approved
    • Safety time on start-up tSA: 10 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • With POC control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 09 Position indicator feedback
    • 39 Air supply time after safety shut-down: 0 s
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610714

    BCU 465T-3/1LR8-OCB1/1

    Burner control unit, series 400
    • Version for extended air control
    • T-product, FM and CSA approved
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • With POC control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 09 Position indicator feedback
    • 39 Air supply time after safety shut-down: 0 s
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611559

    BCU 460-3/1LW3GBD3S4UB1/1

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 4 start-up attempts
    • Configured and prepared for UVD 1
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610294

    BCU 460-3/1LW3GBD2CB1/1

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611259

    BCU 460-3/1LW3GBD3CB1/1

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611450

    BCU 460-3/1LW3GBD3CB1/1E1

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • Voltage for valves and ignition transformer via L1
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611399

    BCU 460-3/1LW3GBD3S2CB1/1

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610572

    BCU 465-3/1LW2GBACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7-25/20
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88611109

    BCU 480-10/3/1LW1GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • Látható: 181-240 / 1509 összesen
    Mutat oldalanként
    Rendezés:
    Top