Üdvözöljük itt: Pirometer.hu! - Hívjon +36 1 4057771

Automatikus égővezérlő egységek BCU 400

Automatikus égővezérlők beépített gyújtó transzformátorral, fém házban gázégők felügyeletére és vezérlésére, folyamatos üzemre, ionizációs vagy UV lángőrzésre. Üzemállapot, paraméterek és lángjel megjelenítése. Diagnosztika és paraméter állítás optikai csatlakozóval. Kézi üzemeltetés égőbeállításhoz. Tanusítással SIL 3 és PL e rendszerekhez.
BCU 440: közvetlen gyújtású, ionizációs lángőrzésű égőkhöz max. 350 kW -ig
BCU 460: közvetlen gyújtású égőkhöz, opcionális levegő szelep vezérléssel
BCU 465: további levegő szelep vezérlési lehetőségekkel, elsősorban sugárzócsöves égőkhöz
BCU 480: gyújtóégővel gyújtott égőkhöz
BCU 4...B1: Profibus DP kapcsolattal

Biztonsági idő gyújtáskor: 3 s, 5 s vagy 10 s
Biztonsági idő üzem közben: 1 s vagy 2 s
Működtető feszültség: 115 V AC vagy 230 V AC

Látható: 241-300 / 1509 összesen
Mutat oldalanként
Rendezés:
  • 88610669

    BCU 480-10/5/1LW1GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 20 s
  • 88611078

    BCU 480-5/3/1LR1GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610212

    BCU 480-5/3/1LR1GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 5 mikro A
    • 05 Main burner switch-off threshold: 5 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610532

    BCU 480-5/3/1LR1GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 5 mikro A
    • 05 Main burner switch-off threshold: 5 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611445

    BCU 480-5/3/1LR1GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610216

    BCU 480-5/3/1LR1GBS2/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610925

    BCU 480-5/3/1LR1GBS4/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610203

    BCU 480-5/3/1LR1GBS4/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610316

    BCU 480-5/3/1LR1GBS4/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610089

    BCU 480-5/3/1LW1GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: 5 s
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610497

    BCU 480-5/3/1LW1GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611075

    BCU 480-5/3/1LW1GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611283

    BCU 480-5/3/1LW1GBS3/1B1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Restart after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 5 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve opens with V2
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88611217

    BCU 480-5/5/1LW1GBB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611140

    BCU 465-3/1LW1GBACB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611008

    BCU 465-3/1LW8GBAB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 4 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611553

    BCU 465-3/1LW8GBAB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610827

    BCU 465-3/1LW8GBS2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 7 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610913

    BCU 465-3/1LW8GBS2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610026

    BCU 465-3/1LW8GBS2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 4 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 2 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610039

    BCU 465-3/1LW8GBS2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 4 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 2 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610326

    BCU 465-3/1LW8GBS2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 4 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 2 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610346

    BCU 465-3/1LW8GBS2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 4 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 2 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610442

    BCU 465-3/1LW8GBS2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 4 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610518

    BCU 465-3/1LW8GBS2AB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 7 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610265

    BCU 465-5/1LW8GBAB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 2 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 20 s
  • 88610339

    BCU 465-5/1LW8GBAB1/2

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88610558

    BCU 460-3/1LW1GBD3CB1/1

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610559

    BCU 460-5/1LW1GBD3CB1/1

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88611121

    BCU 460T-5/1LW1-D3CB1/1

    Burner control unit, series 400
    • Standard version
    • T-product, FM and CSA approved
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 5-15/100
    • High temperature operation: with continuous operation with ionisation/UVD
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 5 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610545

    BCU 460-3/1LW8GBD2S2B1/2

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 2 start-up attempts
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610770

    BCU 460-3/1LW8GBD2S2B1/2

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with intermittent operation with UVS
    • 2 start-up attempts
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610035

    BCU 460-3/1LW8GBD3B1/2

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 2 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610409

    BCU 460-3/1LW8GBD3B1/2

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610565

    BCU 460-3/1LW8GBD3B1/2

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610113

    BCU 460-3/1LW8GBD3S2B1/2

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 8 s
    • 21 Minimum burner pause time tBP: 2 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610546

    BCU 460-3/1LW8GBD3S2B1/2

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 4 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 4 s
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 10 s
  • 88610710

    BCU 460-3/1LW8GBD3S2B1/2

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 4 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611049

    BCU 460-5/1LW3GBD3S2B1/2

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 3 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 15 s
  • 88610639

    BCU 460-5/1LW8GBD3S2B1/2

    Burner control unit, series 400
    • Standard version
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-20/33
    • Front film in English with additional stickers in D, F, I, NL, E
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts
    • PROFIBUS-DP interface
    • Integrated standard PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88610840

    BCU 480-10/3/1LW3GBPD2

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Integrated industrial chassis plug, 16-pin
    • High temperature operation: with intermittent operation with UVS
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Pilot burner is switched off
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 30 s
  • 88610839

    BCU 480-10/3/1LW3GBPD3

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Integrated industrial chassis plug, 16-pin
    • High temperature operation: with continuous operation with ionisation/UVD
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Pilot burner is switched off
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for single-electrode operation
    • Time between two start-ups: 30 s
  • 88610530

    BCU 480-10/3/2LW3GBPD3S3/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Integrated industrial chassis plug, 16-pin
    • High temperature operation: with continuous operation with ionisation/UVD
    • 3 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88611388

    BCU 480-5/3/2LW3GBPD3S2/2

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 3 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Integrated industrial chassis plug, 16-pin
    • High temperature operation: with continuous operation with ionisation/UVD
    • 2 start-up attempts, pilot burner
    • 2 start-up attempts, main burner
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610760

    BCU 480-5/5/1LR3GBPD2S4/4

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Integrated industrial chassis plug, 16-pin
    • High temperature operation: with intermittent operation with UVS
    • 4 start-up attempts, pilot burner
    • 4 start-up attempts, main burner
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610763

    BCU 480-5/5/1LW3GBPD3S4/4

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Integrated industrial chassis plug, 16-pin
    • High temperature operation: with continuous operation with ionisation/UVD
    • 4 start-up attempts, pilot burner
    • 4 start-up attempts, main burner
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610142

    BCU 465-10/1LW3GBPD2S4AC

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 10 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Integrated industrial chassis plug, 16-pin
    • High temperature operation: with intermittent operation with UVS
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 30 s
  • 88610810

    BCU 465-5/2LW3GBPD2S4AC

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 5 s
    • Safety time in operation tSB: 2 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Integrated industrial chassis plug, 16-pin
    • High temperature operation: with intermittent operation with UVS
    • 4 start-up attempts
    • Air flow control
    • With circuit board for signal distribution
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 15 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 5 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 5 s
    • 38 Air post ventilation time: 1 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 15 s
  • 88610362

    BCU 480-5/5/1LWGBS4/1CB1/1

    Burner control unit, series 400
    • Version for pilot and main burner
    • 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
    • 2nd safety time on start-up (main burner) tSA2: 5 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Front film in English with additional stickers in D, F, I, NL, E
    • 4 start-up attempts, pilot burner
    • 1 start-up attempt, main burner
    • With circuit board for signal distribution
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 05 Main burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after pilot burner failure in operation
    • 13 Fault lock-out after main burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 16 Permanent pilot burner
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 25 Main burner flame proving period tFS2: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 9 s
  • 88611416

    BCU 465-3/1LW2GBPD2AC

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7-25/20
    • Front film in English with additional stickers in D, F, I, NL, E
    • Integrated industrial chassis plug, 16-pin
    • High temperature operation: with intermittent operation with UVS
    • Air flow control
    • With circuit board for signal distribution
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 0 s
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88611433

    BCU 465-3/1LW2GBPD2ACE1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7-25/20
    • Front film in English with additional stickers in D, F, I, NL, E
    • Integrated industrial chassis plug, 16-pin
    • High temperature operation: with intermittent operation with UVS
    • Air flow control
    • With circuit board for signal distribution
    • Voltage for valves and ignition transformer via L1
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 08 Air flow monitoring, delayed
    • 39 Air supply time after safety shut-down: 0 s
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: closed
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 20 s
  • 88611046

    BCU 465-3/1LR3GBAB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 15 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 3 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610306

    BCU 465-3/1LR3GBS2AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 115 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: 6 s
    • 21 Minimum burner pause time tBP: 5 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 2 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610253

    BCU 465-3/1LW3GBAB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 0 s
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610331

    BCU 465-3/1LW3GBAB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 10 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 1 s
    • 38 Air post ventilation time: 3 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610345

    BCU 465-3/1LW3GBAB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 10 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 1 s
    • 38 Air post ventilation time: 3 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610492

    BCU 465-3/1LW3GBAB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610537

    BCU 465-3/1LW3GBAB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88611198

    BCU 465-3/1LW3GBS2AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 10 mikro A
    • 12 Restart after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve opens with V1
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 35 UVS check (1 x in 24 hours)
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 5 s
    • 38 Air post ventilation time: 3 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • 88610278

    BCU 465-3/1LW3GBS2AB1/1

    Burner control unit, series 400
    • Version for extended air control
    • Safety time on start-up tSA: 3 s
    • Safety time in operation tSB: 1 s
    • Air valve control
    • Mains voltage: 230 V AC, 50/60 Hz
    • Ignition transformer TZI 7,5-12/100
    • Front film in English with additional stickers in D, F, I, NL, E
    • 2 start-up attempts
    • Air flow control
    • PROFIBUS-DP interface
    • Integrated Variosub PROFIBUS-DP chassis socket, 9-pin
    • 06 Air flow monitoring during purging
    • 06 Air flow monitoring during operation
    • 39 Air supply time after safety shut-down: 0 s
    • 40 Air supply for restart/start-up attempts
    • 41 Air supply after reset
    • 04 Burner/pilot burner switch-off threshold: 1 mikro A
    • 12 Fault lock-out after burner failure in operation
    • 15 Flame simulation check in start-up/standby position
    • 20 Minimum combustion time tB: as safety time on start-up tSA(2)
    • 21 Minimum burner pause time tBP: 0 s
    • 23 Burener/pilot burner flame proving period tFS1: 0 s
    • 30 Air valve can be controlled externally
    • 31 Air valve can not be activated externally on start-up
    • 32 Air valve in the event of malfunction: can be controlled
    • 34 Combustion time during manual mode limited to 5 min.
    • 37 Air supply time: 0 s
    • 38 Air post ventilation time: 0 s
    • Pre-wired for double-electrode operation
    • Time between two start-ups: 10 s
  • Látható: 241-300 / 1509 összesen
    Mutat oldalanként
    Rendezés:
    Top