Automatikus égővezérlő egységek PFU 700
19" panelbe szerelhető automatikus égővezérlők lángmodulációs, impulzus vezérelt vagy többfokozatú gázégők felügyeletére és vezérlésére, folyamatos üzemre, ionizációs vagy UV lángőrzésre. Üzemállapot, paraméterek és lángjel megjelenítése. Diagnosztika és paraméter állítás optikai csatlakozóval. Kézi üzemeltetés égőbeállításhoz. Opcionális levegő szelep vezérléssel és Profibus DP kapcsolattal. Tanusítással SIL 3 és PL e rendszerekhez.
PFU 760: közvetlen gyújtású égőkhöz
PFU 780: gyújtóégővel gyújtott égőkhöz
Biztonsági idő gyújtáskor: 3 s, 5 s vagy 10 s
Biztonsági idő üzem közben: 1 s
Működtető feszültség: 110/120 V AC vagy 220/240 V AC
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Pilot burner is switched off
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with intermittent operation with UVS
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V2
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction closed
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction closed
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with intermittent operation with UVS
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 2 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V2
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with intermittent operation with UVS
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 3 start-up attempts, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with intermittent operation with UVS
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge Low signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Pilot burner is switched off
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge Low signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- T-product, AGA and FM approved
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with intermittent operation with UVS
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 5 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 2 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- T-product, AGA and FM approved
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 5 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V1
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction closed
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- T-product, AGA and FM approved
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with intermittent operation with UVS
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V2
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V1
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 5 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V1
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 5 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 1 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Pilot burner is switched off
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction closed
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 3 mikro A
- 33 High temperature operation: with intermittent operation with UVS
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 5 s
- 23 Burener/pilot burner flame proving period tFS1: 2 s
- 25 Main burner flame proving period tFS2: 5 s
- 20 Minimum combustion time tB: 0 s
- 3 start-up attempts, pilot burner
- 3 start-up attempts, main burner
- Safety time in operation tSB: 2 s
- 12 Restart after pilot burner failure in operation
- 13 Restart after main burner failure in operation
- 16 Pilot burner is switched off
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up can be activated externally
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction closed
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 3 mikro A
- 05 Main burner switch-off threshold: 3 mikro A
- 33 High temperature operation: with intermittent operation with UVS
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 2 start-up attempts, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V2
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 3 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Restart after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with intermittent operation with UVS
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Restart after pilot burner failure in operation
- 13 Restart after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V2
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction closed
- 42 Purge Low signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 5 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with intermittent operation with UVS
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 2 start-up attempts, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V2
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 5 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 2 start-up attempts, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Restart after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V2
- 36 Low fire over run time tKN: 3 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 5 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 2 start-up attempts, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Restart after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V2
- 36 Low fire over run time tKN: 3 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Pilot burner is switched off
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction closed
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with intermittent operation with UVS (with prealarm)
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 5 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 3 start-up attempts, pilot burner
- 3 start-up attempts, main burner
- Safety time in operation tSB: 1 s
- 12 Restart after pilot burner failure in operation
- 13 Restart after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 5 mikro A
- 33 High temperature operation: with intermittent operation with UVS (with prealarm)
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 5 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 3 start-up attempts, pilot burner
- 3 start-up attempts, main burner
- Safety time in operation tSB: 1 s
- 12 Restart after pilot burner failure in operation
- 13 Restart after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with intermittent operation with UVS (with prealarm)
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 5 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 5 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Pilot burner is switched off
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 3 mikro A
- 33 High temperature operation: with intermittent operation with UVS (with prealarm)
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Restart after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 3 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Restart after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 5 mikro A
- 33 High temperature operation: with intermittent operation with UVS
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 2 start-up attempts, main burner
- Safety time in operation tSB: 2 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V2
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction closed
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 33 High temperature operation: with continuous operation with ionisation/UVD
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 5 s
- 23 Burener/pilot burner flame proving period tFS1: 5 s
- 25 Main burner flame proving period tFS2: 5 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 220–240 V AC, 50/60 Hz
- With high temperature operation
- Flame control: UVD 1 (UV continuous operation)
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- T-product, AGA and FM approved
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 10 s
- 2nd safety time on start-up (main burner) tSA2: 10 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 2 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- T-product, AGA and FM approved
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- With high temperature operation
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 5 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 2 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 5 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 2 s
- 25 Main burner flame proving period tFS2: 2 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve opens with V2
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge Low signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- Flame control: Ionisation/UVS
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 5 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction closed
- 42 Purge High signal
Burner control unit for pilot and main burner, series 700
- European market, complies with EC Low Voltage Directive
- Air valve control
- Mains voltage: 110–120 V AC, 50/60 Hz
- Flame control: Ionisation/UVS
- Replacement for PFU 778/PFU 798
- 04 Burner/pilot burner switch-off threshold: 1 mikro A
- 05 Main burner switch-off threshold: 1 mikro A
- 15 Flame simulation check in start-up/standby position
- 21 Minimum burner pause time tBP: 0 s
- 1st safety time on start-up (burner/pilot burner) tSA1: 3 s
- 2nd safety time on start-up (main burner) tSA2: 3 s
- 23 Burener/pilot burner flame proving period tFS1: 0 s
- 25 Main burner flame proving period tFS2: 0 s
- 20 Minimum combustion time tB: 0 s
- 1 start-up attempt, pilot burner
- 1 start-up attempt, main burner
- Safety time in operation tSB: 1 s
- 12 Fault lock-out after pilot burner failure in operation
- 13 Fault lock-out after main burner failure in operation
- 16 Permanent pilot burner
- 34 Combustion time during manual mode limited to 5 minutes
- 50 User-defined password
- 30 Air valve can be controlled externally
- 31 Air valve during start-up remains closed
- 36 Low fire over run time tKN: 0 s
- 32 Air valve in the event of malfunction can be controlled
- 42 Purge High signal