The design of the APX® burner allows for high turndown without premixing fuel and air at low firing rates.

• For direct-fired fume incineration and higher temperature process air heating applications
• COMBUSTIFUME Burner provides stable, efficient, raw gas operations in air streams with oxygen levels as low as 16% (by volume), or with inlet temperatures up to 566 degrees Celsius
• 12 different varieties of COMBUSTIFUME Line Burners available, each optimized in materials and/or performance factors to match your specific application requirements

Maxon CROSSFIRE® Burners are nozzle-mixing, modular line burners designed for a variety of fresh and recirculated air process heating applications.

This unique principle of operation allows “HC” AIRFLO® burners to operate with both low NOx and low CO, over the complete turndown.

Using advanced mixing technology, the KINEDIZER® LE burner produces low emissions with very little excess air.

The KINEDIZER® Staged LE burner is capable of low NOX when given excess air, typically 20-30% at high fire. The same burner, when adjusted for on-ratio operation, will give low CO and high thermal efficiency.

Medium velocity, natural gas fired industrial burners designed to promote stirring within the furnace and improved temperature unifority.

The A & B LINOFLAME® burners create short, ribbon-type flames from modular-designed sections with customized drillings. The VF LINOFLAME® produces a similar ribbon of fire but in a wider, V-shaped pattern.

Series LV AIRFLO® burners provide stable, efficient, raw gas operations in air streams with relatively low duct velocities

The MPAKT® Ultra Low NOx Burners provides the world’s lowest levels of NOx and CO.

MEGAFIRE® HD is a combination burner that burns cleanly with exceedingly low horsepower requirements.

MAXON Series NP & RG AIRFLO® burners consist of a robust cast-iron or aluminum burner-body (which serve as the gas manifold) drilled to discharge the gaseous fuel between diverging stainless steel mixing plates.

OPTIMA™ SLS is a nozzle-mixing, ultra low NOx and ultra low CO burner.

OVENPAK® 400 Burners are nozzle-mixing gas burners for many industrial direct-fired applications where clean combustion and high turndown are required.

OVENPAK® 500 Burners are nozzle-mixing gas, or combination gas/oil, burners for many industrial direct-fired applications where clean combustion is required.

The compact, unique design of the Maxon OVENPAK LE provides simple operation and adjustment through its operational range.

The OXY-THERM 300 offers capacities up to 300,000 BTU/h with a choice of two block shapes. It burns any gaseous fuels including poor quality fuels.

Low NOx, Oxy-Fuel burners offering easy installation, easy switch from gas to oil, and a patented oxygen staging design

High capacity, oxygen fueled furnace burner ideal for down fired mounting applications such as ladle pre-preheating as well as rotary melters, incinerators, and other process heaters.

• Durable, industrial-quality cast iron body construction with stainless steel tile retainers
• Direct spark/flame sensing port for simple, reliable ignition and flame detection
• Easy tile replacement – spring clip assembly requires no tools for removal
• Radiant face temperatures from 566 to 900 degrees celcius deliver uniform heat for a variety of processes
• Rapid heat up and cool down eliminates the need to rotate burner heads away from product

Maxon TUBE-O-FLAME® Burners are nozzle mixing, gas-fired, refractory-less burners specifically designed for firing into an immersion tube.

MAXON TUBE-O-THERM® burners are nozzle-mixing, gas fired, refractory-less burners specifically designed for firing into a small bore tube.

Custom designed furnace burner with plug in reucuperator, custom designed for each customer application.

The VALUPAK®-II gas burner is specifically designed for applications where burners are used under balanced pressure conditions.

XPO™ Indirect burner, engineered for superb performance in liquid-backed tube solution heaters.